EK900 High Frequency Online UPS 1KVA 2KVA 3KVA 6KVA 10KVA

EK-901H(S)/EK-902H(S)/EK-903H(S)

Advantage:

1.Advanced DSP digital control technology 

2.Excellent industrial environment protection performance

3.Perfect protection function 

4.Intelligent battery management function

5.Economic and safe ECO mode operation 

6.High-performance large-screen LCD interface, intuitive and convenient operation

7.Powerful communication interface and network remote monitoring

8.A wide range of optional accessories 

Product introduction:

EK900 series UPS is a kind of double-conversion online design, single-in and single-out high power density miniaturized uninterruptible power supply equipment launched by Powerware. The product has high efficiency and high reliability, and provides reliable and high-quality AC power for your equipment. This series of UPS can be divided into two categories: standard type and long-term type according to the different configurations of the battery part of the machine.


Performance characteristics:

1.Advanced working mode

Double-conversion on-line design is adopted to ensure that the output of UPS is a pure sine wave power supply with frequency tracking, phase-locking and voltage stabilization, filtering out noise, and not being interfered by grid fluctuations; output zero switching time, meeting the high standard requirements of precision equipment for power supply ;

Using input power factor correction (PFC) technology, the input power factor is higher than 0.98;

With 50Hz/60Hz power system adaptive function;

The output voltage can be set to 208V/220V/230V/240V;


2.High reliability of the whole system

DSP digital control is used to directly generate high frequency pulse width modulation wave (SPWM) to control the UPS inverter, which simplifies the control circuit of the UPS, improves the digital control technology of the UPSt, and ensures the consistency and reliability of the UPS;


3.Strong environmental adaptability

Wide voltage input range, avoid frequent battery switching, adapt to areas with harsh power environment;


4.High battery optimization performance

Intelligent battery management function (ABM) technology, prolong the service life of the battery and reduce the number of battery maintenance;


5.Comprehensive and reliable protection

With power-on self-diagnosis function, it can discover hidden dangers of UPS in time and avoid any negligence;

 

6.Humanized network management

The LCD display panel provides users with accurate information about the working environment and working conditions of the UPS.



Model

EK-901H(S)

EK-902H(S)

EK-903H(S)

Capacity

1000 VA / 800 W

2000 VA / 1600 W

3000 VA / 2400 W

Input

Voltage range

Minimum conversion voltage

160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5 % (ambient temperature less than 35 degrees)

(According to the load ratio 100% - 80 % / 80 % - 70 % / 70 - 60 % / 60 % - 0)

Minimum recovery voltage

175 VAC / 155VAC / 135 VAC / 125 VAC ± 5 % (ambient temperature less than 35 degrees)

(According to the load ratio 100% - 80 % / 80 % - 70 % / 70 - 60 % / 60 % - 0)

Highest switching voltage

 300 VAC ± 5 %

Highest recovery voltage

 290 VAC ± 5 %

Frequency Range

40Hz ~ 70 Hz

Phase

Single phase grounding

Power specification

0.99 @ 220-230 VAC Input voltage

Output

The output voltage

200/208/220/230/240VAC

Mains voltage range

±1% Battery mode

Frequency range (synchronization range)

47 ~ 53 Hz or 57 ~ 63 Hz

Frequency range (battery mode)

50 Hz ± 0.25 Hz or 60Hz ± 0.3 Hz

Overload

The ambient temperature is less than 35 degrees:

105%~110%: The UPS will automatically turn off after 10 minutes in battery mode, or switch to bypass mode when the input is normal.

110%-130%: The UPS will automatically turn off after 1 minute in battery mode, or switch to bypass mode when the input is normal.

>130%: The UPS automatically turns off after 3 seconds in battery mode, or switches to bypass mode when the input is normal.

Current peak ratio

3:1

Harmonic distortion

3 % THD Linear load; 6 % THD Nonlinear load

Switching time

 

Mains mode to battery mode

0

Frequency conversion to bypass

4 ms Under standard conditions

Waveform (battery mode)

Pure sine wave

Effectiveness

Mains mode

88%

89%

90%

Battery mode

83%

87%

88%

Battery

Standard machine

Battery model

12V /7Ah

Number of batteries

2

4

6

recharging current

1A

Charging voltage

27.3VDC ± 1%

54.7 VDC ± 1%

82.0 VDC ± 1%

Long extension

Battery model

12V/AH depends on the applicant

Number of batteries

2

3

4

6

8

6

8

Recharging current

1A/2A/4A/6A

Charging voltage

27.4 VDC ± 1%

41.0VDC ± 1%

54.7 VDC ±1%

82.1VDC ±1%

109.4VDC ±1%

82.1 VDC ±1%

109.4VDC ±1%

Exterior

Standard machine

 

Dimensions Deep X Width X Height (mm)

282 X 145 X 220

397 X 145 X 220

421 X 190 X 318

Net weight (kg)

9.8

17

27.6

Long extension

 

Dimensions Deep X Width X Height (mm)

282 x 145 x 220

397x 145 x 220

Net weight (kg)

4.1

4.1

6.8

6.8

6.8

7.4

7.4

Environmental conditions

Operating humidity

20-90 % RH @ 0- 40°C (no condensation)

Noise

Less than 50dBA @ 1 meter

Management

Smart RS-232 or USB (optional)

Support for Windows® 2000/2003/XP/Vista/2008/7/8, Linux, Unix, and MAC

Optional SNMP

Support for power management by SNMP administrators and web browsers

 

* The output power is derated to 80% in the frequency conversion mode; when the output voltage is set to 200VAC or 208VAC, the output power is derated to 80%.

** Current product specifications are subject to change without notice





Get Your FREE Quote

We will contact you within 24 hours.

X